| View previous topic :: View next topic |
| Author |
Message |
KrisS
Joined: 12 Apr 2006
Posts: 137
Location: Poland
|
 Posted: Thu Sep 24, 2009 7:19 am Post subject: How to increase the output pressure on PE preset to 950/1000 |
 |
|
How to increase the output pressure on PE preset to 950/1000 PSI ?
I purchased Automag and I need the tank with higher output pressure than 850 PSI. Is there any way to acheive it with regular PE preset by changing or adding the shims ?
I want it to be safe of course ...
The adjustable reg is not an option at the moment.
_________________
Regards / THX in advance
KrisS aka KSzyszkowski
 BLACK PIMP + BOSS' DETENT MOD + HIBRID LPR VERD KIT + ST CLAMPING FEED NECK + VLOCITY + PIPE KIT |
|
| Back to top |
|
 |
theboss33
Site Admin
Joined: 22 Nov 2005
Posts: 2956
|
| Posted: Thu Sep 24, 2009 9:38 am Post subject: |
|
|
| Yes you can add shims and get to where you need to be. Make sure you only use the PE shims and not the spring washer though. |
|
| Back to top |
|
|
KrisS
Joined: 12 Apr 2006
Posts: 137
Location: Poland
|
| Posted: Thu Sep 24, 2009 9:52 am Post subject: |
|
|
Thx Boss for an answer.
Out of your experience :
- how many shims maximum you can add still to have safe regulator
- how additonall shim converts into preasure increase ?
- should I add them one by one or in pairs ?
_________________
Regards / THX in advance
KrisS aka KSzyszkowski
BLACK PIMP + BOSS' DETENT MOD + HIBRID LPR VERD KIT + ST CLAMPING FEED NECK + VLOCITY + PIPE KIT |
|
| Back to top |
|
|
theboss33
Site Admin
Joined: 22 Nov 2005
Posts: 2956
|
| Posted: Thu Sep 24, 2009 10:14 am Post subject: |
|
|
| I would add 2 and check your tanks out put pressure. You would not want to go much higher then the 950 -1000 psi you are looking for. You will blow the LP burst disk before you get dangerous though. Don't ever bump up that LP disk. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
fChat
Register
Profile
Log in to check your private messages
Log in
